Hook Knives : Introducing: The Finisher Dagger

Wednesday, July 13, 2016

Introducing: The Finisher Dagger

The Finisher is a double hollow ground dagger that can be used as a boot dagger, a general carry knife, a self defense knife and more. This knife gets its name because it was originally designed to finish the fight with large, predatory fish. whether spear fishing in salt water or trying to land large fish in a small kayak or canoe, sometimes you need to finish them off quickly and with one hand before things get ugly.
This knife has been put to the test, from days of carry, to bouncing around in the boat, to the corrosion of saltwater where it made a great diving knife, and it has passed. Stainless steel and rugged micarta handles, this knife is built to take it all! Combined with an innovative sheath and carry system this knife can always be safe and at a close reach, so weather its a knot that needs trimmed or a fight, you can finish it.

Cutting edge length: 3 1/2"
Overall length: 7 1/2"

The finishers sheath is uniquely designed for very versatile carry options and rugged durability. 2" belt slots allow for left or right carry from a belt, or a strap for ankle carry. Each of the 8 rivet holes snugly fit standard parachute cord and allow for an array of customizable weaves to strap the sheath to a pack, vest, kayak, or wherever you might need to get to it quickly.

(Be sure to check your local state and city laws concerning the carry of double edge knives.)

The Finisher and its sheath system saw product testing on the coast of Mexico as a free diving knife where it was used chasing big, toothy barracuda and lots of trigger fish!

spearfishing barracuda and finisher dagger

No comments:

Post a Comment

Welcome

Welcome to Hook Knives! On our homepage you can see a bunch of my past work and what we have been up to. You can also find each of my standard blade designs listed under "About Our Blade Options", as well as information on ordering a custom build. Once you figure out what you like in a blade, you can visit our "handle materials" site to learn more about the vast options you have in handle materials. Once you have decided on both those options then visit our "products list and ordering" page and check out so I can start to build your dream knife! Or contact me at davy@hook-knives.com

Our Knives

Hook knives are built to fill the role of that essential tool that you have whenever you step off the pavement. We build them beautiful, we build them tough. We don't cut corners, we build them right. Our knives could best be considered tools. They are made for use, they are made for work. Like any tool they have a proper application. Knives are designed as a cutting tool, the edges are sharp and hard, meant for slicing and not prying or hacking. The hardness of the steel allows the blade to hold an edge for a long time, but prying with the tip of the knife can quickly chip the edge. If you want to open a soup can then a knife is not the proper tool, get a can opener. If it has a wood handle, then do not wash it in the dishwasher. Treat your knife properly, and use it for its intended purpose, as a tool for skinning, cutting rope, or fishing line and the numerous other functions of a knife. With proper care your Hook Knife will last you for a life time of adventures in this big wonderful world!

Steel

Unless otherwise stated, Hook knives are made from 9CR14 stainless (a virtual twin to 440C) or 440C stainless steel its self, the steel traditionally trusted by surgeons when lives are on the line. We hardened to 58-60 on the rockwell hardness scale. This combination is a very practical compromise between hardness and strength, meaning it weds supreme edge retention with a good resistance to chipping and cracking. Combined with the low-maintenance rust resistance of a stainless alloy this makes for a rough and rugged steel, very useful for the outdoorsman and chef alike.

You can have a custom ground knife from just about any steel available, including a dazzling array of exotic stainless damascus steels. (contact Davy at davy@hook-knives.com)

What is "stabilized" wood?

Stabilizing is a process by which we submerge the wood in resin and place it in our vacuum chamber to pull all the air from the wood and replace it with resin. Once activated the resin adds considerable strength, toughness and water resistance to the wood, making for an exceptionally durable handle material from even soft woods. Our stabilizing process gives nearly 100% penetration throughout the wood, meaning that even if you should happen to scratch the handle, the wood remains protected and durable.

Hook Knives

The Knife

Pages

Wednesday, July 13, 2016

Introducing: The Finisher Dagger

No comments:

Post a Comment